The terminal “12V/24V” and “GND” on the upper side of the CONTROLLINO terminals are for the supply voltage connection. You can supply the CONTROLLINO with 12V or 24V. The range of voltage should be in the range of 10.8V-13.2V and 21.6V-26.4V direct voltage.
IMPORTANT! Please make sure using a stabilized supply voltage!
The maximal supply current I not the same for MINI, MAXI and MEGA:
Exceeding the maximum current would lead to a fusing of the internal fuse of the CONTROLLINO.
The right supply voltage will be indicated by 2 LEDs. The LEDs are marked with “12V” and “24V”. Depending on the supply voltage the LEDs will show the state of the CONTROLLINO.
12V LED 24V LED state
green orange 12V supply voltage active
orange green 24V supply voltage active
orange orange supply voltage outside of supported range
INFO: After connecting the supply voltage CONTROLLINO will start immediately executing the loaded program!
Intro Platform.io together with VS Code is the current de-facto standard for advanced programmers to develop on Arduino boards. CONTROLLINO is natively compatible with Platform.io
Intro The LiquidCrystal library allows you to control LCD displays that are compatible with the Hitachi HD44780 driver. These are the LCDs that are usually connected over a
The first industry-grade PLC with open source software, fully compatible with Arduino.
CONTROLLINO is not affiliated to Arduino and is a derivative product. Tech support for CONTROLLINO needs to be directed to us.